Logo for Australian Made and Owned certification
Logo for Australian Made and Owned certification

SAFETY BARRIERS FOR CARAVAN PARKS

Caravan parks are home environments as much as they are businesses. Guests arrive in caravans, motorhomes, and campervans, children play between sites, and pedestrians move freely across a property where vehicles are constantly arriving, departing, and manoeuvring in tight spaces.

Verge Safety Barriers works with caravan park operators across Australia to put physical safety controls in place that protect guests without disrupting the relaxed, welcoming atmosphere that makes a park successful. Controls that separate moving vehicles from pedestrian areas, protect park infrastructure from daily vehicle contact, and help operators meet their WHS obligations across the entire property.

WHY CARAVAN PARKS NEED SAFETY BARRIERS

Vehicles And Families Share The Same Space

A caravan park is an unusual operating environment. Guests are on holiday, they are relaxed and not thinking about vehicle hazards. Children run between sites without watching for traffic. And the vehicles themselves are large, often towed, and manoeuvring in reverse through narrow lanes in an unfamiliar layout.

The combination of large vehicles, unfamiliar drivers, and guests who are not thinking about safety creates a genuine risk of vehicle and pedestrian incidents on every site. Unlike a workplace where staff can be inducted and trained, caravan park guests have no site knowledge and no obligation to follow safety procedures.

Australian WHS legislation applies to caravan park operators just as it does to any other business. The duty of care extends to guests, staff, and contractors on the property. Physical barriers are the most effective control because they work passively, without relying on guests to read signage or follow instructions, and without disrupting the open, relaxed character of the park.

caravan park safety barriers

KEY CARAVAN PARK SAFETY ZONES

Where Verge Products Make The Biggest Impact

Entry Roads and Site Lanes

The access roads and site lanes through a caravan park see large vehicles manoeuvring at low speed in tight spaces, often in reverse. Speed humps and parking stops control vehicle speed and positioning, while bollards at key points protect park infrastructure, power pedestals, water connections, and building corners from vehicle contact during arrival and departure.

Children's Play Areas and Recreation Zones

Play areas and recreation facilities need clear physical separation from vehicle lanes to protect children who may not be watching for traffic. Barriers and bollards at the perimeter of play areas create a defined, protected zone that keeps vehicles out regardless of how inattentive a driver may be.

Camp Kitchen and Amenities Buildings

Amenities buildings and camp kitchens are high-traffic pedestrian destinations throughout the day and night. Bollards at building corners and entry points protect the structure from vehicle strike during site manoeuvres, particularly from towed vehicles with limited turning clearance.

Reception and Office Areas

The reception area is where guests first arrive, often manoeuvring large vehicles in an unfamiliar entry zone while also on foot collecting keys and park information. Bollards at the reception building facade protect the structure and the people near it from accidental vehicle contact during the arrival process.

Powered Site Pedestals and Utility Infrastructure

Power pedestals, water points, and utility connections throughout the park are vulnerable to vehicle contact from guests manoeuvring onto sites. Bollards and parking stops protect this infrastructure, reducing the repair and replacement costs that come from repeated accidental contact over the life of the park.

Staff Areas and Maintenance Compounds

The maintenance compound and staff areas of a caravan park handle mowers, utility vehicles, and equipment that need to be kept separate from the guest areas of the park. Barriers and boom gates define the boundary between operational and guest zones, controlling access and protecting staff working in maintenance areas.

Entry Roads and Site Lanes Children's Play Areas and Recreation Zones Camp Kitchen and Amenities Buildings Reception and Office Areas Powered Site Pedestals and Utility Infrastructure Staff Areas and Maintenance Compounds

RECOMMENDED PRODUCTS FOR CARAVAN PARKS

CASE STUDIES

See Verge In Action In Commercial And Community Environments

Brookfield Sydney NSW

Brookfield invested in Verge loading dock safety gates at their Sydney facility following heightened legislative focus on loading dock safety. Verge supplied and installed the Dock-PRO system to protect personnel at the loading dock area, delivering a significant improvement in pedestrian safety at one of Australia’s leading property groups.

Marrickville Metro – NSW

Recent changes to loading dock safety legislation prompted the GPT Group to invest in dock safety at Marrickville Metro. Floor space at the loading dock was extremely tight, and GPT required a solution that would not reduce operational capacity. Verge’s Dock-PRO range provided complete fall protection through its effortless lift-up design, allowing the full dock face to remain operational while ensuring compliance with current safety regulations. The installation delivered dock safety without sacrificing any operational space.

WHY CHOOSE VERGE FOR HOTEL SAFETY

Australian Made, Park Ready

Australian Made and Owned

Every Verge product is manufactured at our Glendenning, NSW facility, meaning faster delivery, local technical support, and products designed specifically for Australian conditions and WHS compliance requirements.

Protects Guests Who Don't Know The Site

Caravan park guests arrive unfamiliar with the layout, manoeuvring large vehicles in tight spaces while families are on foot nearby. Verge bollards and barriers provide passive, permanent protection that works without relying on guests to follow instructions or read signage.

WHS Compliant

Verge products are designed to meet Australian Work Health and Safety standards, helping caravan park operators document their hazard controls and demonstrate duty of care to regulators and insurers.

Protects Your Infrastructure Investment

Power pedestals, amenities buildings, and site infrastructure take a constant beating from vehicle contact in a busy park. Bollards and parking stops reduce the repair and replacement costs that accumulate from years of accidental contact, protecting your infrastructure investment over the long term.

Suits The Park Environment

Local manufacturing means we can respond quickly when infrastructure needs protection or a safety gap needs to be addressed, without waiting on international supply chains or extended lead times.

Fast Lead Times

Local manufacturing means we can respond quickly when a safety gap needs to be addressed, without waiting on international supply chains or extended lead times.

PROTECT YOUR CARAVAN PARK WITH VERGE SAFETY BARRIERS

Every caravan park has a different layout, guest profile, and infrastructure setup. Whether you need to protect amenities buildings, secure a children’s play area, or control vehicle speeds through site lanes, Verge can help you find the right solution.

Contact us today for a free site assessment and quote.

$100 Verge gift voucher stack image

Receive A $100 Gift Voucher

SIGN UP TO OUR NEWSLETTER TO RECEIVE YOURS TODAY

*Applies to online orders only. *Cannot be used in conjunction with any other offer  **Must purchase within 3 months of receiving the voucher  ***Minimum order $1000

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Your Industry*

WAIT!

Before you go, check out this video.

If you need assistance with selecting a product, would like a quote or want to ask a question please call our friendly team on 1800 765 539

Download Brochure

  • This field is for validation purposes and should be left unchanged.