Verge Pallet Rack & Wall Protection

Verge Pallet Rack & Wall Protection

Verge Rack-Pro Rack end protection and Mercedes parts warehouse 20181102_130309

In warehouses, pallet rack damage is a major WH&S issue. The Verge Rack-Pro™ is a robust guard designed to protect assets against costly impacts from forklifts. 

Pallet racking often supports tonnes of products on uprights and is not designed to take impacts from a forklift. Even low-speed collisions can cause structural damage that is costly, and dangerous to the lives of workers.

Protecting uprights is critical in avoiding potential disasters. Replacing pallet racking and inventory due to avoidable damage is very expensive, therefore preventing damage means significant, long-term savings.

Verge Rack-Pro™ is manufactured from heavy steel plates and bolted to the warehouse floor independent of the racking, thus isolating any impact from the structural members of the racking system.

FV451 – Verge Rack-Pro Pallet Rack End Protector Double

$435.60
Warehouse safety barriers, forklift safety barriers, mezzanine pallet gates
Code: FV451
Length: 2250mm
Height: 400mm
(To suit back to back pallet racking)

FV452 – Verge Rack-Pro Pallet Rack End Protector Single

$293.70
Warehouse safety barriers, forklift safety barriers, mezzanine pallet gates
Code: FV452
Length: 990mm
Height: 400mm
(To suit single deep pallet racking)

FV453 Verge Rack-PRO Upright Protector

$64.90
rack pro racking protector
Code: FV453
Length: 125mm
Height: 400mm
(To suit custom pallet racking)

FV461 – Verge Wall-PRO LH end connector

Verge Pallet Rack & Wall Protection »
Code: FV461
Height: 330mm

FV462 – Verge Wall-PRO RH end connector

Verge Pallet Rack & Wall Protection »
Code: FV462
Height: 330mm

FV463 – Verge Wall-PRO external corner

Verge Pallet Rack & Wall Protection »
Code: FV63
Height: 330mm

FV464 – Verge Wall-PRO internal corner

Verge Pallet Rack & Wall Protection »
Code: FV464
Height: 330mm

FV466 – Verge Wall-PRO gusset

Verge Pallet Rack & Wall Protection »
Code: FV466
Height: 330mm

FV467 – Verge Wall-PRO rail 300mm high x 3000mm long

Verge Pallet Rack & Wall Protection »
Code: FV467
Height: 330mm

FV468 – Verge Wall-PRO rail 300mm high x 1500mm long

Verge Pallet Rack & Wall Protection »
Code: FV468
Height: 330mm

LV820 – RackShield – to suit 75-90mm rack face

Verge Pallet Rack & Wall Protection »
Code: LV820

LV821 – RackShield – to suit 90-100mm rack face

Verge Pallet Rack & Wall Protection »
Code: LV821

LV822 – RackShield – to suit 100mm+ rack face

Verge Pallet Rack & Wall Protection »
Code: LV822

LV823 – RackShield rear upright protector

Verge Pallet Rack & Wall Protection »
Code: LV823

LV890 – Standard Duty Impact Wall Protector Stand Alone Kit

Verge Pallet Rack & Wall Protection »
Code: LV890

LV891 – Standard Duty Impact Wall Protector Starter Kit

Verge Pallet Rack & Wall Protection »
Code: LV891

LV892 – Standard Duty Impact Wall Protector Add On Kit

Verge Pallet Rack & Wall Protection »
Code: LV892

LV894 – Heavy Duty Impact Wall Protector Stand Alone Kit

Verge Pallet Rack & Wall Protection »
Code: LV894

LV895 – Heavy Duty Impact Wall Protector Starter Kit

Verge Pallet Rack & Wall Protection »
Code: LV895

LV896 – Heavy Duty Impact Wall Protector Add On Kit

Verge Pallet Rack & Wall Protection »
Code: LV896

W6028 – Heavy Duty Impact Wall Protector Corner Module

Verge Pallet Rack & Wall Protection »
Code: W6028

W6030 – Standard Duty Impact Wall Protector Corner Module

Verge Pallet Rack & Wall Protection »
Code: W6030
  • Modular – Low replacement costs. If it gets damaged you only need to replace the damaged part saving you up to 70%
  • Galvanised and powder coated – won’t rust and is highly visible
  • Extremely strong steel construction – Prevents costly damage to racking
  • Lengths – Available in three standard lengths
  • Supplied in kit form – Comes complete with fixings
  • Spare Parts – Full range of spare parts available
  • Mounts independently of racking – Isolates impact from the racking system
  • Comes flat pack – big savings in transport costs
  • Cost effective – Prevention is always cheaper and better than the cure
  • Complies with Australian standard – AS4084-2012
  • Protection to a height of 400mm – Suitable for all brands of pallet racking
  • Reduces damage to racks from fork lifts – It improves employee safety and protects your assets
  • Quick & easy to install – No welding, no cutting, no mess!
  • Provides low cost insurance – compared the cost of potential damage. Saves money, labour & replacement rack costs
  • Designed to absorb impacts – from forklifts, vehicles and trolleys

Verge Bollards Gallery

Verge Pallet Rack & Wall Protection Enquiry Form

Full Name(Required)
Address
Drop files here or
Max. file size: 128 MB.

    Related Products

    Verge Pallet Rack & Wall Protection »

    Verge Dock-Pro™

    Dock-Pro™ dock gates are designed to prevent people and equipment falling into recessed dock areas, platforms or into service pits. The practical, compact lift-a-way design has a top and mid rail configuration, which is lifted easily with a lightweight action.

    Verge Rollover Gate™

    The Verge Rollover Gate is a mezzanine pallet safety gate. It allows pallets to be loaded and unloaded from mezzanine floors safely. The pallet access gate is fast to install, very sturdy and easy to use

    Verge Pallet Rack & Wall Protection »

    Verge Heavy Duty Forklift Barriers™

    Verge HD Safety Barrier is a heavy duty modular barrier system designed to safely segregate between vehicle traffic and pedestrian walkways.

    Removable Bollard - Locakable

    Verge Bollards™

    Our Verge Safety Bollards™ are medium to high security bollards designed for traffic control, property protection and to absorb shocks and knocks.

    • This field is for validation purposes and should be left unchanged.

    WAIT!

    Before you go, check out this video.

    If you need assistance with selecting a product, would like a quote or want to ask a question please call our friendly team on 1800 765 539

    Download Brochure

    • This field is for validation purposes and should be left unchanged.