The Verge Self-Closing V-Gate™ is a modular self-closing gate commonly used where walkways meet vehicle passageways. Using gates makes personnel ‘STOP, LOOK, LISTEN & THINK’ before proceeding into potentially unsafe areas. These gates can be placed in areas of general access or positioned for access to plant and equipment for maintenance or replacement purposes.
BV071 – New Verge Soft-Close V-Gate™ (Left Hand)
BV072 – New Verge Soft-Close V-Gate™ (Right Hand)
BV074 – Verge Double V-Gate 1520w
BV061 – Verge Vivid Gate™ with warning light & signal
The Verge Vivid Gate is battery powered and not hard wired, so there is no need to run power to it. Battery life is expected to last up to 6 months with typical usage in a workplace. When the battery drops below a certain voltage, the LED lights flash alerting you that the battery is low and needs replacing.
The Verge Vivid Gate is powered by standard “D cell” batteries. The Vivid Gate takes 8 batteries. Replacing the batteries is very simple and as they are readily available at any supermarket.
The warning signals are triggered as soon as the gate is opened. The light flashes and the audible beeper sounds for the duration of the time it is activated. This gives you between 10 and 40 seconds, depending on what setting you choose inside the control panel. The product is pre-programmed at 15 seconds as the standard setting.
If the gate is left open for any reason, for example someone propped the gate open, the system will signal four quick beeps every 6 minutes as an alert.
When the Verge Vivid Gate is opened a magnetic read switch activates the alert cycle. The gate is always installed to open inwards, prompting the user to step back when the alert signals are activated, warning both the user and forklift operators to be cautious.
The hardware is pre-programmed for a standard 15 second duration. The cycle length can be adjusted to suit the required amount of time it takes to complete the crossing.
The V-Gate and the Verge Vivid Gate provide clear openings and safety warnings to facilitate safer movement between pedestrians and forklifts. The Verge V-Gate with the Vivid light was developed by our Research and Development team to address a critical hazard within warehouses.
Warehouses may have multiple areas where pedestrians are walking through forklift thoroughfares. The standard self-closing Verge V-Gate prompts pedestrians to look both ways before crossing into the forklift aisle.
Forklifts are generally carrying loads, and vision of the walkway can sometimes be restricted this is why Verge Safety Barriers developed the Verge Vivid Self-Closing Gate, which warns both the forklift operator and pedestrians of potential danger zones.
BV065 – Verge Swing Boom Gate Single 1800w Right hand
BV066 – Verge Swing Boom Gate Single 1800w Left hand
BV067 – Verge Swing Boom Gate Double 3600w
Verge HD Safety Barrier is a heavy duty modular barrier system designed to safely segregate between vehicle traffic and pedestrian walkways.
Dock-Pro™ dock gates are designed to prevent people and equipment falling into recessed dock areas, platforms or into service pits. The practical, compact lift-a-way design has a top and mid rail configuration, which is lifted easily with a lightweight action.
These modular handrails provide fall protection in dangerous areas. Simply install the gates where access is required then load and extend the other sections with the Dock-Pro™ Eco barrier.
Our Verge Safety Bollards™ are medium to high security bollards designed for traffic control, property protection and to absorb shocks and knocks.
SIGN UP TO OUR NEWSLETTER AND RECEIVE A $100 VOUCHER!
*Cannot be used in conjunction with any other offer **Must purchase within 3 months of receiving the voucher ***Minimum order $1000
If you need assistance with selecting a product, would like a quote or want to ask a question please call our friendly team on 1800 765 539
